|
|
|
|
Bike - MERIDA TEAM TIME WARP FRAMESET - 2011 Model Size Medium
Excellent Condition – 1 Seasons Use Only – 7 months old Size Medium 54cm Top Tube Complete Frameset – Forks, SeatPost, Front & Rear Brakes, Outer Cables (Jagwire), Modular Head system, all manuals and instructions. This is Merida’s top end triathlon bike, and is very light and stiff. I had this built up as a Ironman bike and it weighed just under 8kg complete with X-lab behind seat bottle mount, gas canisters, inflator, Garmin Computer etc. Lots of adjustability left in the seatpost, can be extended up to 850mm (Top of Seat to CL of bottom bracket). I’m 5ft 10 with relatively Short legs, and had it set with a distance of 743mm, this could be reduced further to give a minimum seat height of about 650mm. Steerer tube has been cut to suit the middle +20mm Modular head system, but has 60mm stick-out left therefore the higher +40mm modular head system can still be used (all parts included). (I used the middle +20mm Modular head system with 25mm spacers) There are some slight chips on the frame around the bottom bracket area where the chain has come off, and also on the seatpost which slipped on first day of use. (I forgot to use carbon assembly paste!!) – See photo’s at bottom of the page. See what Merida say below about the TIME WARP and the modular head system. http://www.merida-bikes.com/en_gb/cms/1312/en_gb-en_int-ntf_time-warp http://www.merida-bikes.com/en_gb/bike/2012/146/Triathlon+Bike/TIME+WARP+Team I’m selling as I have left the racing team I was racing for therefore the frame needs to go. New Bike being delivered this week therefore no reasonable offer refused. £1150 ono. Contact me on 07768 408346 or email martin (add in the @ symbol) martingoodlad.com
Frame Geometry below;
|
Sponsors
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
